|MODULE SIZE||LiveRoof Standard: 1′ x 2′ x 3-1/4″ (soil height appx. 4-1/4″)
LiveRoof Lite: 1′ x 2′ x 1-3/4″ (soil height appx. 2-1/2″)
LiveRoof Deep: 1′ x 2′ x 3-1/4″ (soil height appx. 6″)
LiveRoof Maxx: 1′ x 1′ x 3-1/4″ (soil height appx. 8″)
Soil fills soil elevator, plants and soil obscure module edges.
Standard and Deep: 14 oz./sq. ft.
Lite: 10.5 oz./sq. ft.
Maxx: 14 oz./sq. ft.
|MATERIAL||100% recycled polypropylene (avg. 10% post-consumer, 90% post-industrial) 100 mil. thick walls.|
|WATER DISPERSAL||Approx. 10.0 gal. per min. per lineal foot.
Hi-Flow option available with standard and deep module.
|MODULE COLOR||Black or gray|
LiveRoof Standard: approx. 27-29 lbs./SF
LiveRoof Lite: approx. 15-17 lbs./SF
LiveRoof Deep: approx. 40-50 lbs./SF
|DRAINAGE||Positive drain holes, at lowest point in module.|
Proprietary LiveRoof specified engineered soil, based upon German FLL granulometric specifications, 94+% by dry weight inorganic content for minimal shrinkage/decomposition. (92% in British Columbia).
Dry weight approx. 60-65 lbs/cu.ft.
May vary somewhat with local grower.
|ACCEPTABLE PROTECTIVE UNDERLYING MATERIALS||
Modules to be placed directly upon heavy duty (HDPE, Polypropylene, TPO, EPDM or recyclable PVC) slip sheet/root barrier of 40-60 mil. thickness with effectively bonded seams. This is placed as an additional protective barrier above roof waterproofing membrane and extended 3 inches vertically along parapet to ward against edge abrasion. This may also be glued to parapet if manufacturer approves.
Confirm suitability of waterproofing membrane with manufacturer. Alternatively low profile drain boards work well and manufacturers of cold fluid applied reinforced urethane membranes typically warrant their systems for use in conjunction with the LiveRoof® system.
|IRRIGATION SYSTEM||Irrigation is recommended for backup during prolonged hot, dry and windy weather patterns.Simple overhead system is inexpensive and effective insurance. Irrigation requirements are dependent on plant selection, climate and roof design.
|EDGE TREATMENTS||Coengineered RoofEdge® aluminum edging with adequate drain perforations recommended. Any edging should allow for adequate drainage (extending to the bottom of the edging) with sidewalls tall enough to completely cover the modules and contain the soil.|
|PAVERS||Coengineered LiveRoof RoofStone® recommended.|
|WIND UPLIFT||Patent-pending WindDisc™ method for improving wind uplift resistance is recommended for green roofs subject to high wind conditions.|
|PLANTS||Drought-tolerant, hardy RoofTop Proven™ plants recommended. Consult the Licensed Grower in your region for specific recommendations.|
|CONVEYANCE METHOD||Prevegetated modules to be delivered by Hoppit® or other appropriately engineered conveyance device.|